Dent Repair Nashville. Kurt The Dent Man

Dent Repair Nashville. Kurt The Dent Man I am a MOBILE PAINTLESS DENT REMOVAL SERVICE to the Nashville, TN, Brentwood, TN, Franklin, TN, Mt.

I have over 25 years experience at Paintless Dent Removal (PDR) There is no job to small. If you want to TEXT me a picture of your damage area I can tell you pretty much everything you need to know about the results, the cost, how much time I will need to do the repair right.
615-306-9580

Ok here we go on these well define body lines on the Dodge Challenger. They suck as Paintless Dent Removal ( PDR ) Techn...
07/05/2020

Ok here we go on these well define body lines on the Dodge Challenger. They suck as Paintless Dent Removal ( PDR ) Technicians. It took some time to work it out without paint stress issues.

Kinda funny. Customer gets this classic sold. Goes to back it out of garage the day before pick up from transport, after...
07/05/2020

Kinda funny. Customer gets this classic sold. Goes to back it out of garage the day before pick up from transport, after telling buyer car is perfect, hits side of garage door opening. Freaking out he calls me, I make it a point to run out with no big expectations and thank goodness I can deliver a great repair.

Metal is so thin today it moves around like a ripple effect I tell customers. Like throwing a rock into a pond it sends ...
07/05/2020

Metal is so thin today it moves around like a ripple effect I tell customers. Like throwing a rock into a pond it sends out waves. The process is to work those ripples or waves of metal back to its original locations. Which takes time and precision. You have to rebuild radius’s, contours, or body accents back into that area or into those body panels.

Tailgates are a different gauge of metal. It all depends on access to back side of panel with the right tools.
07/05/2020

Tailgates are a different gauge of metal. It all depends on access to back side of panel with the right tools.

Bedside. The reflections in the panel tell the story of how bad it was to how good it turned out. Metal had a crowning a...
02/20/2019

Bedside. The reflections in the panel tell the story of how bad it was to how good it turned out. Metal had a crowning at top and bottom of panel. Metal had to be moved up from the bottom panel and down on top of panel to fill in dented area plus regain the top and bottom radius or curvature and make it flow naturally like the original way bedside was.

Sharp hit on body line of a Range Rover Front Fender.
02/20/2019

Sharp hit on body line of a Range Rover Front Fender.

This was a lease turn in at Nissan headquarters. Found out that day there was a mounting plate in that location of the f...
02/17/2019

This was a lease turn in at Nissan headquarters. Found out that day there was a mounting plate in that location of the front fender. That day I had to find a lot of patience to do this repair.

A lot going on in this repair. Pinches in metal. Inner bracing to work around, a crease at point of impact. Door handle ...
02/17/2019

A lot going on in this repair. Pinches in metal. Inner bracing to work around, a crease at point of impact. Door handle support plate to work under. Came out really good for being a very cold day in TN that day. Body Shop wanted more to repair it than the customer could pay, customer did not want to claim insurance, for fear of much higher premiums. Customer was beyond happy with repair for the cost.

Pinch in metal at top of dent had to be worked with ease not to crack the paint. Being at the angle of the dent in a sma...
02/17/2019

Pinch in metal at top of dent had to be worked with ease not to crack the paint. Being at the angle of the dent in a small area between edges and body line, the metal had a push and pull reaction to the metal. There was about a 10” area that the metal had to be reworked and moved around to smooth the panel back to perfection

Sharp dent rear 1/4 panel of Porsche got always take precautions that paint does not crack. Came out flawless.
02/17/2019

Sharp dent rear 1/4 panel of Porsche got always take precautions that paint does not crack. Came out flawless.

Dent right next to edge and towards front of rear door. Hit hard and deep. Of course the inner bracing of door was right...
04/14/2018

Dent right next to edge and towards front of rear door. Hit hard and deep. Of course the inner bracing of door was right behind dent. The paint had a very small chip. Tooled it out from behind working and rolling the edge back level. Three stage paint. The customer already got the high body shop estimate to paint and blend both doors. Paintless Dent Repair
Kurt The Dent Man 615-306-9580.

This Paintless Dent Removal was in rear 1/4 panel of car. The dent had rolled the upper wheel well of metal inward. The ...
04/08/2018

This Paintless Dent Removal was in rear 1/4 panel of car. The dent had rolled the upper wheel well of metal inward. The metal was close to being stretched beyond repair. Access was difficult. A couple different processes were used to achieve great results. Customer was extremely happy.

Address

Springfield, TN

Opening Hours

Monday 8am - 6pm
Tuesday 8am - 6pm
Wednesday 8am - 6pm
Thursday 8am - 6pm
Friday 8am - 6pm

Telephone

+16153069580

Website

Alerts

Be the first to know and let us send you an email when Dent Repair Nashville. Kurt The Dent Man posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Dent Repair Nashville. Kurt The Dent Man:

Shortcuts

Share

Category