MacGyvers Workshop

08/23/2026

MacGyvers Workshop has some new camera and audio gear and needed a project to break it in and set up a workflow so the idea of filming a music video came to mind. The song will have elements of country, rock, and rap. I'm seeking Male vocalists and a "Hype Man" There's no money in it, the idea just came up as a fun way break in some new gear. DM me for more info if interested.

03/24/2026

Check out this PSA if you have a Woods RD7200 Finish Mower and you need to replace one of the spindles...

If you're replacing a spindle on your Woods RD7200 Rear mount finish mower, be sure whomever you buy from specifies the serial number range the spindle will ...

03/24/2026

Busy as all get out in the workshop! Catching up on a project that's been in here for a while. I finally got to edit part 1 of the video. You can check it out here;

Watch as we yank out the anemic, air cooled 150cc motor and swap in a 260cc water cooled one. Should make for an exciting ride!

01/26/2026

Going on 24 hours without power at MacGyvers Workshop. Operations are at a standstill.
Wishing all the linemen stay safe as they work hard to restore everyone's power from this historic storm!

10/08/2025

Part 8 of the 4l60e overhaul series is up! Check it out as I repair a broken neutral safety switch and replace the electrical connectors prior to reinstalling the transmission;

In part 8, we repair a broken "PRNDL" (neutral safety switch) the truck came in with before we reinstall the transmission. We thought a previous owner may ha...

10/07/2025

I have a playlist on my YouTube channel called "Pew-Pew Stuff" which will make the videos of our Pew-Pew parties and any gun related stuff easier to find right here;

All things "Pew-Pew"

08/26/2025

Business is booming at MacGyvers Workshop! So many projects going on! This one is a friends golf cart, an early Yamaha G1 with the 2 stroke that runs backwards for reverse. It would stop running after it warmed up, He thought it might be a bad stator. Turns out the crank bearings and seals were toast. Couldn't pull any vacuum through the carb. It was a big job, but we got it done!

08/21/2025

I really need top post more on here LOL!

06/24/2025

While working on the 2003 Silverado 4L60E project, a friend asked for some help with a stripped oil drain plug in his 1986 Honda TRX 250. He was worried that it was going to be a major repair due to how inaccessible the drain plug was. No problem! Watch as we have some funny moments and "Git er done"!

In this video, I fix a stripped out oil drain plug on a friends 1986 Honda TRX250 4 wheeler.