Jacks Of Trade Mods

Jacks Of Trade Mods Car Mods and more The three of us were brought together through our passion for motorsports. Mod on!

We modify, restore, improve, repair, and even reengineer anything that is brought to our shop. Although we primarily work on automobiles, we are able to work on anything with an engine, and if it doesn't have one we can put one in it! Enjoy our page and please contact us with any questions or if you want your vehicle featured on our page!

OEM mini starter upgrade & TCI street fighter kit for the 73 Cuda. Also found where 3rd gear went off to in the old tr...
10/22/2019

OEM mini starter upgrade & TCI street fighter kit for the 73 Cuda. Also found where 3rd gear went off to in the old trans 😂

Powerstop Z36 kit going on a 2015 F150 with a leveling kit and 35s. The zinc plated rotors will help minimize rust, dril...
02/02/2019

Powerstop Z36 kit going on a 2015 F150 with a leveling kit and 35s. The zinc plated rotors will help minimize rust, drilled and slotted rotors will keep heat down and brake pads clean. Upgraded pads will give a better bite. Check out the before and after!

Fox body sells for more than Supra?! Fox body > Supra 🤔
01/19/2019

Fox body sells for more than Supra?! Fox body > Supra 🤔

When it comes to some of the most common sports cars seen on the roads these days that can be had at a very unsubstantial price point, look no further than the Fox body Ford Mustang. Most will attest to this car as being one of the best "bang for your buck" rides out...

Access port is up to date and installed!
06/30/2017

Access port is up to date and installed!

We're back! Topping off with some in the for the trip. Any guesses as to the first HP modification will be to th...
06/30/2017

We're back! Topping off with some in the for the trip. Any guesses as to the first HP modification will be to the ?

Well the Monte Carlo SS build is still moving forward got the block got a fresh coat of paint a very nice set of Edlelbr...
12/17/2016

Well the Monte Carlo SS build is still moving forward got the block got a fresh coat of paint a very nice set of Edlelbrock valve covers. It also has found its home in the Monte Carlo SS. We got the transmission serviced and mated up to the freshly built 350. Also we installed a new set of ho**er shorty headers.

Got the block and crankshaft and rods and pistons back from the machine. The block has been bored .030 also got a set of...
12/17/2016

Got the block and crankshaft and rods and pistons back from the machine. The block has been bored .030 also got a set of flat top pistons. Just wanted to give a big shout to Bo's machine shop for a great job on the engine

I know it has been a while since the last post but we have been hard at work this is the start of our Monte Carlo SS bui...
12/17/2016

I know it has been a while since the last post but we have been hard at work this is the start of our Monte Carlo SS build started with a 350 ci Chevy stock with high miles got it torn down and sent to the machine shop

Installed a hellion twin turbo kit on a 2016 GT waiting on tune so we can show you how it runs
06/17/2016

Installed a hellion twin turbo kit on a 2016 GT waiting on tune so we can show you how it runs

Another satisfied customer a full stainless exhaust. Headers back from stainless works and a cold air intake and a tune....
03/20/2016

Another satisfied customer a full stainless exhaust. Headers back from stainless works and a cold air intake and a tune. Everything went very smooth and ran excellent on Mr Bryant's 2016 mustang GT

Address

Pasadena, MD
21122

Telephone

706-831-5135

Website

Alerts

Be the first to know and let us send you an email when Jacks Of Trade Mods posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Jacks Of Trade Mods:

Shortcuts

Share

Category