CB Powersports & Performance

Call

CB Powersports & Performance Small mechanics shop located in North Mississippi

10/14/2026

⚠️I would like to announce on top of being a Ride Engineering dealer we are now apart of their trackside support program! Meaning if you have any questions or comments about any setup or installation at the track please feel free to swing by and see me! On top of that if you place an order through me while at a race or at a track qualifying orders receive a 20%-25% discount! Thank you all for the continuous support! I hope y’all have a bless work day today!⚠️

Proud to announce CB Powersports is your new Midsouth Ride Engineering dealer! If you are in the market for next level ...
10/12/2026

Proud to announce CB Powersports is your new Midsouth Ride Engineering dealer! If you are in the market for next level handling braking and engine accessories do not hesitate to reach out for pricing!

Would like to take a moment to congratulate the two CB Powersports holshot winners from the MSAX arenacross race in Memp...
09/30/2026

Would like to take a moment to congratulate the two CB Powersports holshot winners from the MSAX arenacross race in Memphis over this past weekend! What an honor to be able to help support the local youth racing! We will try to be at as many of these races as possible! See yall in Winona!

2021 Polaris 1k dropped off for a list of work! New axles installed front winch installed front running lights and hood...
09/17/2026

2021 Polaris 1k dropped off for a list of work! New axles installed front winch installed front running lights and hood scoop light bar installed rear center brake installed and LED whips installed! Remember we are more than just a service shop! We do aftermarket installs as well! Reach out for an estimate!

We work on dang near anything! Engine dropped off for a check over to fix leaks. After all gaskets and seals replaced a...
09/17/2026

We work on dang near anything! Engine dropped off for a check over to fix leaks. After all gaskets and seals replaced and quality checked customer calls asking if we can do the install on the machine! So after install on machine and tested to make sure machine functions properly elite carpet cleaning is back on track to keep up with their busy cleaning schedule! We love helping get small businesses taken care of because we are a small business too and understand the struggle of keeping it pushing along!

Customer drop off wanting this 2001 r6 brough back to life after sitting for some years. Carb clean plugs wires fuel pu...
09/17/2026

Customer drop off wanting this 2001 r6 brough back to life after sitting for some years. Carb clean plugs wires fuel pump and filter oil and filter tank clean the whole 9 yards! Thank you to all my new and continuing customers to allow me to grow reach farther and contrite to provide a reliable service to the midsouth!

Just wanted to let everyone know CB Powersports is now an authorized tuff jug dealer! If you in need of new race cans pl...
09/16/2026

Just wanted to let everyone know CB Powersports is now an authorized tuff jug dealer! If you in need of new race cans please reach out!

2018 Canam defender would not move without jumping really badly and a starting issue. After diag found locked up clutch...
09/08/2026

2018 Canam defender would not move without jumping really badly and a starting issue. After diag found locked up clutches and electrical corrosion. Installed new primary and secondary clutches with a new belt and cleaned all electrical points with a few harness repairs!

Full transmission rebuild for a 2014 Honda 420 electric shift! 3rd and 4th gear dogs shaved down from hard usage and low...
08/28/2026

Full transmission rebuild for a 2014 Honda 420 electric shift! 3rd and 4th gear dogs shaved down from hard usage and low maintenance causing machine to jump out of gears!

2005 Honda Rincon 650 not cutting fan on when within operating range! Have chasing pesky wiring issue found that ecm had...
08/27/2026

2005 Honda Rincon 650 not cutting fan on when within operating range! Have chasing pesky wiring issue found that ecm had be back fed power and had cooked it! With that being said customer wanted a secondary option instead of buying an expensive ecm. So we installed an aftermarket cooling fan controller! Bike finished with happy customer!

Address

Olive Branch, MS
38654

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 10am - 5pm
Sunday 12pm - 5pm

Telephone

(901)6040636

Website

Alerts

Be the first to know and let us send you an email when CB Powersports & Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category