Cherry Automotive Solutions

Cherry Automotive Solutions Message Us For All Your Fuel Injector Service Needs
(1)

08/17/2026

🔥 1650cc FIC injectors getting put to the test.

Big injectors deserve more than a quick spray test. We put them through our flow bench to verify flow, spray pattern, and consistency before they go back into your build.

Whether you’re running E85, flex fuel, or a high-horsepower setup, properly tested injectors are one less thing to worry about. 🛠️

Need your injectors tested or serviced? Send us a message.
📦 Nationwide shipping available
📍 Cherry Automotive Solutions
📞 (405) 760-0344

08/16/2026

OEM Toyota injectors deserve OEM-quality service. 🔧🔥

These Toyota injectors came in for a full service — new filters, fresh seals, internal lubrication, and complete flow testing to make sure they’re performing like they should.

Why replace a good OEM injector with a cheap aftermarket replacement when you can restore the injectors Toyota engineered in the first place?

Clean injectors = better fuel delivery, better consistency, and peace of mind. 💯

📦 Nationwide shipping available
📍 Oklahoma City, OK
📞 (405) 760-0344
Cherry Automotive Solutions

08/15/2026

Dialed In 🔥

LS truck-style injectors getting put through the full test — because looking clean isn’t enough.

We check how they actually perform under real operating conditions, making sure each injector is delivering the consistency your engine deserves. 💯

A good set of injectors can make all the difference between a smooth-running setup and chasing problems in the tune.

📦 Fuel Injector Cleaning & Flow Testing
🚗 Cars • Trucks • Performance • OEM
🇺🇸 Nationwide Shipping
📍 Oklahoma City, OK
📲 (405) 760-0344

08/14/2026

🔥 THIS is why injector service matters.

Same injector. Same hardware. Very different condition. 👀

The difference between a clean injector and one that’s been exposed to years of fuel, heat, ethanol, and deposits can be huge.

A dirty or restricted injector can mean:
❌ Uneven fueling
❌ Poor atomization
❌ Misfires
❌ Lost performance
❌ Potential engine damage

We don’t just “clean” them — we flow test, ultrasonic clean, service, and verify them so you know exactly what you’re putting back in your engine.

📦 Nationwide shipping
🔧 Fuel injector service for performance & OEM applications
📍 Oklahoma City, OK
📲 (405) 760-0344

Don’t guess. Test your injectors.
Tag someone who needs to see this 👇

08/13/2026

🔥 ID2000s ready for another build.

When the horsepower goes up, your fuel system needs to keep up. These Injector Dynamics ID2000s are built for serious performance, but even the best injectors need proper maintenance to perform at their best.

We’ll clean, flow test, inspect, and service your injectors so you know exactly what’s going into your engine. 💥

💧 Flow tested
🧼 Professionally cleaned
📊 Verified for consistency
🔧 New filters & seals as needed
⛽ Built for high-performance fuel systems

Don’t let a questionable injector become the weak link in your build.

📦 Nationwide shipping
📍 Oklahoma City, OK
📞 (405) 760-0344
Cherry Automotive Solutions

Tag someone building serious horsepower 👇
What are you running for injectors?

08/12/2026

🚨 DON’T LET A DIRTY INJECTOR RUIN YOUR BUILD. 🚨

You can have the turbo.
You can have the fuel system.
You can have the perfect tune.
You can have all the horsepower in the world…

…but if your injectors aren’t delivering fuel correctly, none of it matters. 🔥

This is exactly why injector service matters. 👀

Dirty or restricted injectors can cause:
💥 Uneven fueling
💥 Poor spray patterns
💥 Misfires
💥 Lean/rich conditions
💥 Poor idle & drivability
💥 Lost power
💥 And in the wrong situation, serious engine damage

That tiny injector is responsible for delivering the fuel your entire build depends on. Don’t make it the weak link.

We clean, inspect, flow test and service injectors to make sure you know exactly what your fuel system is doing. 📊

Before you blame the tune… check the injectors.

👇 How many of you have pulled injectors that looked WAY worse than expected? Drop a 🔥 if you’ve been there.

📦 Nationwide shipping available
📍 Oklahoma City, OK
📞 (405) 760-0344
Cherry Automotive Solutions

Boosted Turbo Horsepower CarBuild DynoTuning Automotive RaceCar JDM LS 2JZ

What would you rather see, AI assisted or poorly edited? 😂 If you need your injectors serviced send us a message 📲Common...
08/11/2026

What would you rather see, AI assisted or poorly edited? 😂

If you need your injectors serviced send us a message 📲

Common Top Feed Port Injectors are $20 each injector

- dynamic flow testing
- multi-stage cleaning
- new seals
- leakage testing
- spray pattern test
- ms & rpm ramp testing

Also filters, pintle caps, body refinishing, etc when applicable

We can also do direct injectors, side feed & specialty. DM for pricing.

All of our services are tested @ 3bar - 2ms, 4ms, 8ms & static

Each set has a full flow report available

📍 Located in Oklahoma City
📦 Nationwide Shipping Available

🔧 Cherry Automotive Solutions
📲 (405) 760-0344

08/11/2026

Big thanks to Cherry Automotive Solutions for always handling our injector cleaning. Got these 1500s and 2200s ready for us in no time. #405

08/10/2026

🔥 2400CC OF PURE PERFORMANCE 🔥

If you’re into high-horsepower builds, you’ve probably seen these before.

These 2400cc injectors are part of the same proven Bosch 210-style injector family used across some of the most popular performance injectors on the market — including FIC 2150, 2200cc, 2000cc and other Bosch 210-based applications.

Why are they EVERYWHERE? 👇

💥 Massive fuel capacity
💥 Excellent atomization
💥 Great for high-horsepower applications
💥 Extremely popular for turbo & boosted builds
💥 Excellent choice for E85 / ethanol setups
💥 Proven across countless performance platforms

There’s a reason the Bosch 210-style injector has become one of the most recognizable high-flow injectors in the performance world.

But an injector being “high flow” doesn’t mean it shouldn’t be tested.

At Cherry Automotive Solutions, we service and dynamically flow-test your injectors to verify performance and consistency before they go back into your build.

📦 Nationwide shipping available
📍 Oklahoma City, OK
📞 (405) 760-0344

Have a set of injectors that need serviced? DM us or give us a call.

08/10/2026

OEM VW DIRECT INJECTORS 👀🔥

They may look clean on the outside… but what’s happening inside?

Direct injectors operate under serious demands, and deposits, flow changes, and spray-pattern issues can have a major effect on how an engine runs.

These OEM VW injectors came in for professional service and testing:

✅ Injector cleaning
✅ Flow testing
✅ Spray pattern inspection
✅ New seals/components as needed
✅ Before & after verification

You can’t always diagnose an injector by looking at it.
The numbers tell the story. 📊

If your VW is experiencing a rough idle, misfire, poor fuel economy, hard starting, or inconsistent performance — the injectors deserve a proper test.

📦 Nationwide shipping
📍 Cherry Automotive Solutions
📲 (405) 760-0344

Would you replace your injectors without testing them first? 👇

Address

Oklahoma City, OK

Telephone

+14057600344

Website

Alerts

Be the first to know and let us send you an email when Cherry Automotive Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category