Junior's Equipment Repair- JER

07/17/2026

There's more than enough work to go around. Always happy to go help other local small guys when its needed. Not only is he another independent mechanic but glad to call him a friend 🤙

Competitors? Nah…. We all gotta help each other out. Thankful for friends with bigger cranes.

11/08/2025

When the saying drive it til the wheels fall off is taken a little too seriously.
Big thanks to Courville's Garage and their towing friends, for getting this customer off the road without more damage, and safely back to the yard so I could get it fixed up.
By lunch time the following day, this bucket truck was back in service and ready to roll again for a storm call to restore power in our region.

11/01/2025

Spooky storming with Amara Utilities on Halloween for Wayne County, PA.

10/16/2025

Fun one this afternoon. Master link on the drive chain for the feed chains snapped

10/10/2025

Couple weeks ago, I had a old customer from the shop I use to work for, come through town and had a wheel seal blow out after brakes were just put on. Due to the rotors and hubs being one bolted assembly, to change the rotors, you have to remove the hub. The nut wasn't properly torqued down so it loosened up and caused a wheel seal leak.
Thankfully for him, he caught it early and called me before it did more damage. I don't go out for pickup work anymore but due to the client and what he was hauling and the escorts he had with him, I came out to get him back going before his restricted hours came.
New bearings and races, wheel seal, and degreasing, and checked the other side for proper torque, he was back on the road to California.
PS. Oil bath bearings do not get grease.

09/06/2025

Simple annual service and scan for the check engine light for a glowplug, turned into a way bigger issue than inspected. Its always 1 broken bolt away from becoming a 3 day project.

Due to the location of this machine for 10 months out of the year working on beach front properies, the salt in air, and years of dust blowing around and collected in the top of the engine, rusted the outside of the glowplugs and caused them to break off upon removal. Starting off with soaking them for weeks in penetrating oil, the EZ out broke off and would require welding or drilling to remove the remaining bit of the glowplugs. At this point I needed a clean workspace to disassemble the engine in so we had it moved to a better location. Inorder to get access to weld to the glowplugs, we had to remove the injectors which also turned into a battle to get them removed. After many attempts with Lava-Torch Fabrication of welding washers and nuts to the glowplugs, removal of the head was needed to safely drill out the glowplugs. Once everything was removed and cleaned, assembly was a breeze. Even gave the machine a bath and a detail in the cab

07/31/2025

If anyone is trying to reach out to me via text message and I haven't responded. I have been trying to resolve a problem with AT&T over the last couple days, and switched phones this morning with the same issue still present.
Sorry for any inconveniences.

05/21/2025

Weekend storming with a great customer for support. Couple quick repairs and kept the guys happy with some hot food for lunch and dinner instead of fast food places. Great to see another part of this beautiful country and watch these guys work quickly and efficiently to get power restored for people.