Mott Motorsports

Mott Motorsports Mott Motorsports is an auto repair/restoration business located in North Texas, specializing in Datsun/Nissan.

Let us know if you need a car, parts, general maintenance, motor swap, custom fabrication/welding, or complete restoration from start to finish.

Wellll lots of stuff has come and gone over the past year, just been busy and haven’t updated. Here’s one of the latest ...
12/21/2023

Wellll lots of stuff has come and gone over the past year, just been busy and haven’t updated. Here’s one of the latest ones to get some work, neighbor Tim got new suspension on his truck along with a slight lift to fix the old worn suspension…now his Yota is lifted to go with his wife’s slammed Scooby

Well it’s been a busy winter so I’ll just post up a couple of cars that got some work done and future/current builds as ...
04/13/2022

Well it’s been a busy winter so I’ll just post up a couple of cars that got some work done and future/current builds as well.

First up, we have a great guy David Heller that got je**ed around by a transmission shop after doing a nice ls1 swap (his first). He blew the auto that was supposed to be rebuilt and so we fixed that issue permanently with a manual swap and all the parts needed.

Now he’s got a nice t56 in the car but even with the 300zx clsd, traction was limited (to say the least) and those 225 tires just wouldn’t stop lighting up, so we had to go ahead and add some meat…well the issue with that is 400hp needs a lot of meat, and wider tires than the z could comfortably fit in the fenders so to help with that problem and get the look/stance he was after we decided to add some bolt on flares and a nice upgraded wheel and tire setup as well. The old 16x8s came out and now he’s on 17x9-13 and 17x9.5-19 wheels with 245/45front tires and 275/40 rears. Car looks amazing and should be a lot more fun with the third pedal 👌

Well been a little bit since the last post (as usual)….picked up some cars, dropped off a couple that were finished for ...
10/07/2021

Well been a little bit since the last post (as usual)….picked up some cars, dropped off a couple that were finished for customers, and got a scoobie looking good for some neighbors 😉 the front mud flaps are gonna need to be raised up or pulled off now 😂

Quick update guys...Been suuuuper busy lately but gotta give a shout out to one of the best looking (we’re getting there...
07/12/2021

Quick update guys...

Been suuuuper busy lately but gotta give a shout out to one of the best looking (we’re getting there..) whales around Dallas...even if it does look like a traffic cone 😂

Big time transformation happening with this car...so far we replaced the busted gas tank with a newly refreshed one, changed out the lines, changed all the injector clips and some other small electrical stuff.

We got it on some coilovers, as well as some old eagle alloys (15x7 0offset fronts with 195/50/15 and 15x8 -25 rears with wide 245/40/15 Hankook sticky rubber) that have been polished back to life.

Then we put stainless brake lines on all four corners and while we were upgrading we went ahead and swapped to disk brakes with slotted and vented rotors on the back...cuz everyone hates messing with leaky wheel cylinders and just drum brakes in general.

With the stance and stopping taken care of, we went ahead and replaced the tie rods and balljoints and some bushings so that everything is nice and tight. Gonna raise it back up for better daily drive-ability, just wanted to see how low she would go..

Huge difference from where it started and a little more work and she’s gonna be a blast for her owner thats gonna enjoy her.

Well it’s been a little bit and been busy but here’s one of the recent cars to get ALOT of work done. Car had sat for ye...
05/24/2021

Well it’s been a little bit and been busy but here’s one of the recent cars to get ALOT of work done.

Car had sat for years, new owner bought it and had it painted (gutsy right 😉) then after paint he was looking to get it in good running shape.

So he started by ordering injectors because it had a fueling issue...I got some new clips for the engine bay (injectors, CHTS, TPS, etc).

Installed everything and still had a fuel issue so I started at the back and cleaned up some things, swapped out a kinked line, added a see through pre-filter..and boom good fuel pressure.

Now it was surging around 2-2200 rpm, which tells tps sensor. So I swapped that out for him as well.

Got it running great...and now you could realllly hear the turbo wheel banging around 🙄🤦‍♂️ so got a rebuilt installed as well as cleaning some things up on the manifold and got a 3” exhaust with a resonator on so it’s got a healthy growl to it.

Ofcourse we couldn’t have it looking stock after all that, so first order was new shocks and springs to get it low.

Then he had the stock turbo wheels powdercoated black and slapped on some good sized/meaty tires all around (235/60/15).

Came out looking great and runs real good...

This was an f100 that had been in the family as a farm truck for 50+ years and he wanted to fix the rust and make sure i...
04/06/2021

This was an f100 that had been in the family as a farm truck for 50+ years and he wanted to fix the rust and make sure it would be a solid truck for another 50+ years... Joey McFadden

These are some past projects that were completed...with a small description of work done
04/06/2021

These are some past projects that were completed...with a small description of work done

Finally got around to getting this all set up (thank you Michael Thomas for all the help along the way)... I appreciate ...
04/05/2021

Finally got around to getting this all set up (thank you Michael Thomas for all the help along the way)...

I appreciate everyone that has liked and followed the page...feel free to hit that SHARE button for me as well...and I will continue providing Parts, Services, and Building great cars for you all 😉

If you need something, shoot me a message or send an email to the address provided and I’ll get back with you ASAP

Again, thanks to all my Family, Friends, and Customers for allowing me to do this and help you with your projects, it means a lot to me 👍

P.S. I got stickers in so if you’ve bought a car, parts, had work done, or just want to help spread the word...let me know and I’ll get you one or two. I’ve got 3” & 4” rounds on hand ready to go...thanks again guys, I couldn’t do it without all of you!!!

Address

Little Elm, TX

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 5pm
Sunday 8am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Mott Motorsports posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Mott Motorsports:

Shortcuts

Share

Category