SidewayzBrick

01/12/2025

06/06/2024

Let me play you the whiney music of my people.

05/05/2024

I do expert level bodywork, my rates start at $550 an hour, lmk.

04/28/2024

So I started assemblying the new ford 8.8 in the Vo and just bought 2 or 4 of everything to see what worked and what didnt. I took a pic of all the part numbers for anybody who needs them. I will have a couple more posts on the outcome but the basic setup is 4 Explorer calipers, 2 for reg rear brakes and 2 for hydro, 2 rotors, 4 pairs of rear brake shoes (2 for reg brakes, 2 for hydro), 4 banjo bolts(2 reg brakes, 2 hydro), 4 explorer soft lines (2 reg brakes, 2 hydro). I also picked up a few pre made hard brake lines with adapters on them to route from the soft line to the brake line on the car. Remeber the Vo has 2 brake lines that run to each of the rear calipers and you should keep that setup with the new Explorer rear end. You can also make your own hard lines but these were cheap. I also bought some female brake butt connectors to go from the male end on the hard line from the caliper to the male end on the soft line on the car. I will post more up as I work on it, to help all of this makes sense.
#

04/16/2024

Shiny