05/09/2026
Why My Pricing May Be Higher Than Other Shops in the Metroplex
In the Dallas–Fort Worth area, there’s a huge range of installers — from low‑cost mobile guys to high‑end studios. My pricing reflects the quality of materials, the level of prep work, and the experience that goes into every install. Here’s what sets my service apart:
1. Premium Materials Only
I don’t use generic or low‑grade films.
I install CarPro Immortal and UltraFit Crystal, both high‑quality, self‑healing TPU films with excellent clarity and durability. Cheaper shops often use:
- older‑generation films
- non‑self‑healing films
- films that yellow or haze over time
You’re paying for long‑term protection, not a short‑term band‑aid.
---
2. Advanced Prep Work Before Film Ever Touches the Car
Most shops skip or rush prep. I don’t.
I do:
- full panel decontamination
- adhesive removal
- proper surface prep
- edge cleaning
- paint inspection
- correction where needed
This ensures the film lays flatter, bonds better, and lasts longer.
Prep is where 80% of the quality comes from — and it’s where cheaper shops cut corners.
---
3. Clean, Seamless Installs — No Shortcuts
I wrap edges where possible, avoid unnecessary relief cuts, and take the time to make the film look factory‑level.
A lot of installers:
- leave exposed edges
- stretch film too aggressively
- cut on the paint
- leave lift lines or fingers
My installs are built to be invisible, not just “on the car.”
---
4. 20+ Years of Experience in Paint Correction & PPF
I’ve been detailing and correcting paint since 2002.
I understand:
- paint systems
- clear coat hardness
- body lines
- how film behaves on different surfaces
Experience matters — especially on performance cars, German paint, and complex bumpers.
---
5. One‑on‑One Service — No Rushed Volume Work
I’m not a high‑volume shop.
I don’t stack cars or rush installs to get the next one in.
You get:
- my full attention
- my hands on the car
- my quality control
- my reputation on the line
You’re paying for craftsmanship, not speed.
---
6. Long‑Term Value, Not Short‑Term Savings
Cheaper installs often lead to:
- lifting edges
- premature yellowing
- visible seams
- contamination under the film
- film failure in 1–2 years
My installs are built to last, look better, and protect better — which saves money long‑term.
