OK1-Automotive Technology LLC

04/04/2021

Complex vehicle electronics require innovative service solutions. Our world revolves around our customers to ensure efficient, safe repair http://ok1automotive.com/

03/04/2021

“Post Scan” to insure that all codes have been identified and cleared if needed. Most collision repair shops do a Post scan to complete vehicles health after an accident.

03/04/2021

Smart Cruise Control (SCC) : The smart cruise control system allows a driver to program the vehicle to control the speed and following distance. The SCC system detects the vehicle ahead without depressing the brake or accelerator pedal. http://ok1automotive.com/

03/04/2021

BLIS is designed to help detect vehicles that have entered the driver’s blind spot zone. The system does so using radar sensors located behind the rear bumper fascia on each side of the vehicle. The detection area extends from the exterior mirrors to about 10 feet beyond the bumper on both sides. http://ok1automotive.com/

02/13/2021

Many times, drivers aren’t 100% alert or engaged at the wheel. This can easily be the case of driving while tired or somewhat going on auto-pilot during a long commute or trip. Because of this, sometimes we unintentionally drift a bit out of lanes. This is extremely dangerous, but luckily great safety features such as the Honda Lane Departure Alert with Steering Assist is there to help. http://ok1automotive.com/

02/13/2021

Many new vehicles are coming equipped with a neat piece of technology called a Blind Spot Monitor or BSM. This system is designed to help drivers navigate more safely by alerting drives when a vehicle or other object is in their own vehicles “blind spot”http://ok1automotive.com/

02/13/2021

Never use solid wire. Solid wire is for stationary household use; the vibration in your car or truck will eventually break it. Use automotive-grade stranded wire, not pieces salvaged from an old extension cord. You'll need to find some automotive-grade wire of the same gauge as the wiring you're replacing. Try to follow the color codes on the factory wiring harness if possible. http://ok1automotive.com/

01/27/2021

OK 1 AUTOMOTIVE TECHNOLOGY LLC. provides repair to all automobiles including foreign and domestic cars, OK1! uses OEM diagnostics equipment to ensure a more accurate diagnosis of performance issues. We insure all Complex vehicle electronics require innovative service solutions. Our world revolves around our customers to ensure efficient, safe repair–no matter where you are located. http://ok1automotive.com/

01/21/2021

Calibration procedure listed in the appropriate Service Information. The calibration process should be completed within 3–5 minutes when the proper driving conditions are met. If the conditions are not met, the front view camera module will continuously run the service point calibration until the calibration process is successfully completed. http://ok1automotive.com/

01/21/2021

Since wiring harnesses run inside and through body panels they can be damaged in a collision. Sometimes this isn't obvious because the damaged wire is inside a body panel. A wire can be dislocated in a collision so that it rubs against a sharp piece of sheet metal. It will work for awhile after the collision, but eventually the insulation will wear through and short or ground out. http://ok1automotive.com/

01/21/2021