Norimade Fabrication

Norimade Fabrication FDM 3D Printing
CNC Plasma Cutting
3D Mechanical Design
IR 3D Scanning

Custom Fabrication of sheet metal and plastic parts! No MOQ

A90 Supra seat offcie chair conversion!Client reached out and I had the opportunity tackle his unique request, turning h...
19/06/2026

A90 Supra seat offcie chair conversion!

Client reached out and I had the opportunity tackle his unique request, turning his stock Supra seats into office chairs with functional power controls!

These seats run off CANBUS signal so we had to figure out how to fool the control module, after that we figured that these could be powered by Ingco cordless batteries, so no need to plug the seats into a wall when adjustments are needed.

Another client had reached out to have his stock GTR seats converted, so watch out for that one aswell!

Onboard air supply for .hiluxj Making the most out of the vacant engine bay space to fit an aluminum tank and HF air com...
25/04/2026

Onboard air supply for .hiluxj

Making the most out of the vacant engine bay space to fit an aluminum tank and HF air compressor. A huge truck horn was mounted behind the front bumper so as to not intrude airflow to the heat exchangers. Brackets use existing mounting points on the body. No welding and cutting to the vehicle necessary, completely reversible. A component panel was made to make diagnosis of the whole system easier in case of any issues.

A bracket for the breaker and relay holder was also made from 3D printed PA-CF.

Slider mounts for this Toyota YarisScanned the vehicle floor and determined centerline offset distance from mounting poi...
08/03/2026

Slider mounts for this Toyota Yaris

Scanned the vehicle floor and determined centerline offset distance from mounting points to the centerline of the steering wheel to ensure drive is aligned with the wheel.

One challenge with the Yaris was to make sure there was enough room for the scissor jack so it could be taken out, while maintaining enough structure for the bracket to do its job.

Corner scale levelling platforms and elevation tables.racing.solutions.ph needed a set of platforms to accommodate their...
06/03/2026

Corner scale levelling platforms and elevation tables.
racing.solutions.ph needed a set of platforms to accommodate their corner scales and alignment turn tables so we exchanged ideas to execute a design that was suited for their use.

5mm steel construction to ensure rigidity. Position rings on the tables to ensure platforms don't slip off during alignments. Thickened long nuts and welded wheel stops for the platforms and some 3D printed emblems.

Quick fill receiver panel and fuel tank filler neck for this Mustang GT.Receiver panel had to be re-fabricated into meta...
05/01/2026

Quick fill receiver panel and fuel tank filler neck for this Mustang GT.

Receiver panel had to be re-fabricated into metal to provide rigidity during refuelling.

Two prototypes of the filler neck were made, first was to check fitment to the tank and fuel hose clamping. The second prototype revealed that atmosphere vents had to be added as the factory tank breathers were simply not enough for the volume of fuel being added. 3/8" fittings were incorporated to help with this issue. Filler neck was made from PA-CF material with TPU gaskets.

c/o to .racing.solutions.ph for choosing us to work on this project and for the guidance.

Address

126 Veterans Avenue , Quezon City
Metro Manila
1127

Website

Alerts

Be the first to know and let us send you an email when Norimade Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category