MPCJR Auto supply

27/09/2026

kunting kimbot nalang operation na MPCJR77 AUTOWORKZ CAR REPAIR SERVICES mga Boss ..

19/09/2026

it's a final countdown :):):)

05/09/2026

Another aditional Tools and spare parts of our Automotive shop... Salamat Lord...

01/09/2026

Thank you Lord sa new blessings additional tools ng aking Shop..

26/08/2026

26/08/2026

opening soon

23/08/2026

With Kabugok – I just earned their Kabugok badge! 🎉

22/08/2026

Steering System – Functions and Components

18/04/2026

Professional Insight: The Critical Nature of "Joint Play"
​In professional diagnostics, the most common failure point in a suspension system is the degradation of integrated rubber bushings and ball joints. A Ball Joint or Tie Rod End is designed to operate with zero "axial play." Even 1mm of movement inside the joint socket can lead to significant alignment shifts under braking loads. This "play" causes the tire to oscillate, leading to a phenomenon known as "feathering" wear on the tread. If you hear a "clunk" while turning over a speed bump, the joint's internal nylon seat has likely failed, and the metal-on-metal contact is a sign of imminent separation.
​Common Suspension Issues & Professional Solutions
​Loose or "Vague" Steering: If there is too much "dead space" in the steering wheel before the car reacts, the Tie Rod Ends or the internal gears of the Rack & Pinion are likely worn.
​Solution: Inspect the dust boots on the tie rods; if they are torn, road grit has entered the joint. Replacement of the tie rod ends followed by a laser alignment is the standard fix.
​Continuous Bouncing After Bumps: If the car continues to oscillate after hitting a dip, the Suspension Strut Assembly has lost its hydraulic damping ability.
​Solution: Check the strut body for oil leaks. If "misting" or fluid is present, the internal seals have failed. Struts should always be replaced in pairs (front or rear) to maintain balanced handling.
​Humming or Growling Noise from Wheels: A consistent drone that gets louder with speed usually points to a failing Wheel Hub Bearing Assembly.
​Solution: Lift the vehicle and check for play by rocking the wheel at the 12 and 6 o'clock positions. If movement is felt, the bearing must be replaced immediately to prevent the wheel from seizing or detaching.
​Maintaining the structural integrity of your vehicle's foundation is the expertise we bring to every job at Auto Experts