MAX Fabrication

Home
New Zealand
Tauranga
MAX Fabrication

Call Website

MAX | FABRICATION
For all your metal work requirements

Specialising in everything metal,

From general engineering and trailer building
MIG & TIG welding
Automotive performance fabrication
Stainless steel and steam tube turbo manifolds
Stainless exhaust systems
Aluminium Inter cooler Piping
Inlet manifolds and ITB conversion adapters
Turbo conversions and installation,
Suspension modification, Static and Air
Engine and drive-line conversions

03/11/2026

Matt brought his NB MX5 in for a full exhaust, he supplied a set of headers that Joe tweaked and then made the rest of system from there.

2.5" stainless, with an ADRENALIN R louver resonator and chambered oval combo,
Along with one of our stubby chambered round mufflers
Matts brief was he wanted it quietish but to have the capability for his future plan to turbo

03/11/2026

Kale Kirk dropped his V10 BMW off for an X pipe, to try and reduce the raspy sound

Once we heard it I didn't think one X would make enough of a difference so Joe set to work and made up a pair of X's and fitted one to either side of the ADRENALIN R twin muffler,
Followed buy new outlet pipes with a pair of teardrops
They definitely changed the exhaust note

03/11/2026

Twin scroll turbo manifold that Brent has whipped up for an FD RX7 build we've got on

19/10/2026

Intake manifold vapour blasted for Seth's FD build that we've got underway Seth Buckley

25/09/2026

77 MG GT V8 exhaust knocked out by Joe,
Featuring a pair of ADRENALIN R torque chamber resonators and a twin inlet/outlet muffler
But different with an X pipe right on the muffler inlet, very limited for space on this one

20/09/2026

So rewarding seeing Marcus out and enjoying his FD

18/09/2026

Cute little aluminum powersteering reservoir for Kale Kirk supra build, featuring a pair of billet end caps

04/09/2026

Spot of vapour blasting on gearbox housing and bellhousing for Aaron Smith sweet looking
Fair to say the gearbox bits came up pretty sharp

03/09/2026

Joe's whipped up a 3.5" exhaust for an FD RX7 this week

Cat fitted for cert, along with a decat pipe

We fitted an ADRENALIN R magnum oval in the centre and reused the customers rear muffler and managed to get the noise down to 89db for noise cert with a bit of extra baffling inside the cat
limit on this one was 90db due to the year it was registered

22/08/2026

Couple of small jobs ticked off on Calvin's S13
How cool is the gold flake engine bay

We moved the radiator 5" closer towards the engine to cover the viscous fan with custom lower rad mounts, a top duct and integrated mount, and custom coolant overflow tank

Then Mark removed the electric power steering from the boot and we swapped back to an engine driven pump, with a custom reservoir.

Next up we made up inner guards to keep all the track grime out of the engine bay

New baffled catch can with drain and plumbing back to engine, modified the rocker cover and powder coated bright red to match the car

Bonnet exit screamer,

Reinforced the clutch pedal mounting bracket and leveled the pedal to same height as brake pedal

And a couple of headlight mounting tabs,

Red and black powder coating thanks to Lance

Address

Tauranga

Telephone

+64212560978

Website

https://maxfab.co.nz/

Alerts

Be the first to know and let us send you an email when MAX Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.