Project R334

Project R334 1997 R33 Nissan Skyline street/drag build. Hoping to get into the 10's on the quarter mile one day.

Hit that like button and follow along as I race, break, fix and upgrade my car. Current 1/4 mile ET PB:
12.667 @173.849 km/h

Current best 60': 1.842

New 1/4 ET goal:
12.2 sec

Current specs:

Stock block
Stock turbo
Tomei Expreme turbo elbow
Tomei Poncams
FMIC
Decat
Apexi frontpipe
Apexi catback exhaust
Boost set to 10 psi
Splitfire coilpacks
Nismo Super Coppermix clutch with lightweight flywheel
Nitrous Express Proton Plus nitrous kit

Suspension game leveled UP⬆️ pro drag coilover kit to help get some 🔥 60ft times. ...
14/12/2025

Suspension game leveled UP⬆️
pro drag coilover kit to help get some 🔥 60ft times.


dash mount to nicely mount the IC7 display dash in the OEM cluster location👌 ...
08/12/2023

dash mount to nicely mount the IC7 display dash in the OEM cluster location👌


Some more goodies for the Skyline.Decided to go with the Haltech IC7 digital dash instead of having several gauges and ...
22/11/2023

Some more goodies for the Skyline.

Decided to go with the Haltech IC7 digital dash instead of having several gauges and the Haltech CAN keypad to control some of the planned functions.

Got the mock up engine in the car, next it's time to figure out sensor and solenoid placement, build a new wiring harnes...
04/02/2023

Got the mock up engine in the car, next it's time to figure out sensor and solenoid placement, build a new wiring harness, and fuel and oil lines.


Big boy intercooler supplied by
04/02/2023

Big boy intercooler supplied by


Another nice part all the way from Australia🇦🇺 to add to the build.Quality catch can/washer bottle combo doesn't only ...
21/01/2023

Another nice part all the way from Australia🇦🇺 to add to the build.

Quality catch can/washer bottle combo doesn't only look great in the engine bay, but will work great as well👌


Another small piece to the puzzle🧩 acquired. 5-0 Ignite billet RB26 X VCT front timing cover.Saves me from having to cut...
09/11/2022

Another small piece to the puzzle🧩 acquired. 5-0 Ignite billet RB26 X VCT front timing cover.
Saves me from having to cut up and weld a perfectly good OEM RB26 one.
Billet parts look too good🤤 so, bit of a shame it's getting painted.


Brake upgrade ✅- DBA front + rear discs- Intima SR brake pads
20/08/2021

Brake upgrade ✅
- DBA front + rear discs
- Intima SR brake pads

Bye bye cable throttle, idle control valve and all that. Hello drive by wire. # ...
29/06/2021

Bye bye cable throttle, idle control valve and all that. Hello drive by wire.

#

Parts delivery day😎 Some nice mufflers and Vbands to build the 4 inch custom exhaust for the car. ...
29/04/2021

Parts delivery day😎 Some nice mufflers and Vbands to build the 4 inch custom exhaust for the car.

New standalone engine management system ✅So as I have always had good experience with products, I chose to upgrade fro...
09/09/2020

New standalone engine management system ✅

So as I have always had good experience with products, I chose to upgrade from the Platinum Pro ECU that I had initially bought for the car to the newer, more advanced Elite 2500 ECU.

This will allow for more control over the nitrous and water/meth system, wideband knock control and some other functions that I'd like to utilize.

Some good looking TiAL Sport parts to keep the boost in check ✔️- TiAL Q blowoff valve- Dual TiAL 44mm MVR wategates ...
07/08/2020

Some good looking TiAL Sport parts to keep the boost in check ✔️
- TiAL Q blowoff valve
- Dual TiAL 44mm MVR wategates

Adres

Strijen
3290–3293

Website

Meldingen

Wees de eerste die het weet en laat ons u een e-mail sturen wanneer Project R334 nieuws en promoties plaatst. Uw e-mailadres wordt niet voor andere doeleinden gebruikt en u kunt zich op elk gewenst moment afmelden.

Snelkoppelingen

Delen