KEPA AUTO spare

15/04/2024

7 WAYS TO STOP YOUR CAR FROM OVERHEATING.

See below 7 tips "Francis knows engines" said could help drivers overcome the challenge of car overheating.

1. Turn the engine off.

“If your car overheats on the road, the first thing you need to do is turn it off, open the hood and let it cool off on its own.”

2. Never take off the radiator cap.

“You definitely don’t want to uncap the radiator system or the water system. It will be under high pressure and will blow off and burn you if you try to do that.”

3. Let the engine cool off before you do anything.

“Normally your car will have warning lights and a pressure relief valve. If your engine starts to overheat, it will give you plenty of warning before you could actually damage anything. You really can’t address any of the problems though until the engine cools off on its own.”

4. Refill antifreeze / coolant.

“In the race car, the rules say we have to use water, but in your car you should use antifreeze. Once everything cools back down to roughly room temperature, open the system up and fill it back up with new antifreeze.”

5. Check hoses for leaks, blockages or bursts.

“Inspect to see if you have a leak or something that caused your engine to overheat, because normally, the car doesn’t just overheat on its own. Chances are you either have a leak in the coolant system, or a thermostat went bad, which can happen a lot. On older cars it was much more common, but on newer cars you sometimes need to have a professional technician take a look. Regardless of the age of your vehicle, the number one rule is to just let your engine cool off. ”

6. Carefully monitor the temperature gauge.

“If the gauge crosses over to hot, pull over to a safe location and turn the engine off.”

7. Keep a safety kit in your car.

“Have a kit that contains coolant, a tool kit, a blanket, a working flashlight, non-perishable foods and water in the car at all times, just in case.”

Francis also further suggests that one must:-

Making sure y

31/03/2024

Decoding the Engine Control Unit (ECU): Inputs, Outputs, and Sensor Interactions
Read more: https://bit.ly/47VxZzV

An Engine Control Unit (ECU) is an electronic control module that manages the functions of the engine and its components in a modern vehicle. Here is some information on its inputs, outputs, and how different sensors work together in point form:

ECU MAIN SIGNALS
Input Signals and Output Signals.
There are three main types of sensor commonly in use. The Hall Effect sensor, Optical sensor or the Inductive sensor.

How different sensors work together:
- The TPS and MAF sensors work together to determine how much fuel and air the engine needs at any given time.

- The O2 sensor helps regulate the air-to-fuel ratio by providing feedback to the ECU on the amount of oxygen in the exhaust.

- The CTS helps the ECU adjust the fuel injection and ignition timing based on the engine temperature.

- The CKP sensor provides the ECU with information on the position and speed of the crankshaft to optimize igni

In the world of automotive technology, understanding the Engine Control Unit (ECU) is crucial. This article explores the intricate web of inputs, outputs, and sensor interactions, decoding the secrets behind optimal engine performance.

31/03/2024

Suspension Systems

Suspension systems in vehicles play a crucial role in providing a comfortable ride, ensuring stability, and enhancing overall vehicle performance. The primary functions of a suspension system include:

1. **Smooth Ride:** Suspension systems absorb shocks and vibrations from the road, providing a smoother and more comfortable ride for occupants.

2. **Vehicle Stability:** They help maintain the contact between the tires and the road, ensuring better traction and stability during acceleration, braking, and cornering.

3. **Handling:** Suspension systems contribute to the vehicle's handling characteristics by controlling body roll, pitch, and dive during various driving conditions.

4. **Road Noise and Vibration Control:** Properly designed suspension systems also contribute to reducing noise and vibrations transmitted from the road to the vehicle's interior.

Suspension systems consist of several components, each serving a specific purpose. Common components include:

1. **Springs:** These are responsible for supporting the vehicle's weight and absorbing shocks from the road. Common types include coil springs, leaf springs, and torsion bars.

2. **Shock Absorbers (Dampers):** Shock absorbers control the movement of the springs, preventing the vehicle from bouncing excessively. They help maintain tire contact with the road.

3. **Struts:** Struts are similar to shock absorbers but also serve as a structural component of the suspension. They integrate the spring and damping functions into a single unit.

4. **Control Arms:** Control arms connect the wheel hub to the chassis and allow for the vertical movement of the suspension.

5. **Anti-roll Bars (Sway Bars):** These bars connect the left and right wheels, providing resistance to body roll during cornering.

6. **Bushings:** Bushings are used at various points in the suspension to isolate vibrations and reduce friction between components.

There are different types of suspension systems, including:

13/02/2024

1. i-STOP, "Intelligent-Stop," is a technology developed by Mazda for their vehicles. i-STOP is an idling stop system that automatically shuts off the engine when the vehicle comes to a complete stop, such as at traffic lights or in heavy traffic. This helps to conserve fuel and reduce emissions. When the driver lifts their foot off the brake pedal, the system quickly restarts the engine, allowing for a seamless and efficient driving experience.

2. Lane Departure Warning (LDW) is a safety feature in vehicles designed to alert the driver when their vehicle unintentionally drifts out of its lane. Using cameras or sensors, the system monitors the lane markings on the road. If it detects that the vehicle is veering out of its lane without the use of a turn signal, it provides a visual or audible warning to alert the driver, prompting them to take corrective action. LDW aims to enhance driver awareness and reduce the risk of unintentional lane departures, contributing to overall road safety.

3. TCS typically stands for Traction Control System. TCS is a vehicle stability control system that helps prevent wheel spin during acceleration. It works by adjusting engine power or applying braking to individual wheels to maintain optimal traction and prevent skidding or loss of control in slippery or uneven road conditions. TCS is particularly useful in enhancing vehicle stability and safety, especially in adverse weather conditions or challenging terrains.

4. Parking sensors are devices installed in vehicles to assist drivers in parking by detecting obstacles in the vicinity of the vehicle. These sensors, often ultrasonic or electromagnetic, are placed on the vehicle's bumpers and provide audible or visual alerts to the driver as the vehicle approaches an obstacle during parking. The alerts intensify as the distance between the vehicle and the obstacle decreases, helping the driver gauge the proximity and avoid collisions. Parking sensors are a common feature in modern vehicl

24/07/2023

Ranger second hand 150cc
35000k inform me

21/07/2021

Rack end available at KEPA AUTO spare

14/07/2021

Control Arms available at KEPA AUTO Spares

12/07/2021

If u need any of this auto spare part contact KEPA AUTO Spares and you will be helped

06/07/2021

Bushes at a good price-kepa KEPA AUTO Spares

05/07/2021

You can also learn cars suspension
mech

04/07/2021

Heavy duty spring available at kepa KEPA AUTO Spares

22/06/2021

We value our esteemed customers