Maritime Courses Online

Maritime Courses Online MECO offer a range of online, self paced Boat Electrics courses with full instructor support.

Do it like a pro - Learn with MECO

At MECO Training we teach boat owners and professional marine electricians the same, starting off from the science of how electricity behaves in a circuit and applying this to the marine electrical and electronics systems. Now in our 4th year we have trained over 1500 boat owners, yacht skippers, marine electricians, boat builders, and engineers right from the m

ost basic principles of electricity up to the highest level of advanced marine electronics available online today. MECO courses are used in many UK Maritime Universities and technical colleges as part of maritime science and engineering courses. Also, we now provide training for apprentices working in boat building and marine engineering.

Yes - We still teach Radar Plotting, and range calculations too.https://www.mecotraining.com/courses/radar-masterclass/l...
19/08/2026

Yes - We still teach Radar Plotting, and range calculations too.
https://www.mecotraining.com/courses/radar-masterclass/lectures/23894091
If you or your team need to get your RADAR skills up to scratch we have a great online training course here that covers more than you might think. This self paced training program takes learners from ZERO radar knowledge through the finer subtleties of Pulsed V Broadband radar, fine tuning the controls, and filters, integration with RTE's & SARTS, the limitations of automation - and what it is actually doing, all the way through to MARPA. But not until we have covered plotting - yes - we still teach manual paper plotting - even if learners never plot again, we feel this is still the best way to teach relative and true motion, collision avoidance and the only way to fully understand automatic plotting aids is to understand how to do it your self!

The MECO Marine Electrical MET 4 course package is the first fully online course to go from complete beginner to MeT 4 l...
25/07/2026

The MECO Marine Electrical MET 4 course package is the first fully online course to go from complete beginner to MeT 4 level. Learn how the basics work all the way to advanced electronic networks and high power complex battery systems.
This package includes MET 1,2,3 and the Marine Advanced Lithium Ion Battery Systems course.

The MECO MBS 4 package covers Marine Electrical, Electronics and Advanced Power Systems. Although the subjects are highly detailed and technical, no previous experience or specific prior knowledge is required. Each subject is taught fully, starting from the basics and building through to the highest...

Many thanks for the positive review Steve.
19/06/2026

Many thanks for the positive review Steve.

i have just completed the MECO MET 1 &2 course and thoroughly enjoyed it. As well as written le ...

11/05/2026

Short explainer for MECO Training.

If you'd like to learn everything there is to know about small craft electrical and electronics we've got you covered:
16/04/2026

If you'd like to learn everything there is to know about small craft electrical and electronics we've got you covered:

A complete package, from the very basics of the electrical system through to a highly detailed study of marine electronics.

One loose connection !https://www.facebook.com/share/p/1CRbirXFAM/?mibextid=wwXIfr
18/02/2026

One loose connection !

https://www.facebook.com/share/p/1CRbirXFAM/?mibextid=wwXIfr

It was not heavy weather.
It was not a collision.
It was not a navigational mistake.

It began with a loose electrical connection.

In the early hours of 26 March 2024, the container ship MV Dali departed the Port of Baltimore on a routine outbound voyage. The weather was calm. Visibility was good. The vessel was proceeding through the Patapsco River shipping channel under pilotage.

Ahead lay the Francis Scott Key Bridge — a vital roadway link spanning one of America’s busiest ports.

Shortly after departure, the vessel experienced electrical power fluctuations. Lights flickered. Systems went dark. Power was restored briefly — then lost again.

A final, complete blackout disabled propulsion and steering control.

Without electrical power, a modern container ship becomes momentum without command. In restricted waters, there is little margin for recovery. A mayday call was transmitted. Anchors were deployed in an attempt to slow the vessel. But distance and time were limited.

At approximately 6–7 knots, Dali struck a main support pier of the bridge.

Within seconds, the structure collapsed.
Six roadway workers conducting overnight maintenance lost their lives. The Port of Baltimore was effectively shut down. Commercial traffic halted. What began as a machinery failure aboard a single vessel escalated into a national infrastructure emergency.

According to investigative findings released by the National Transportation Safety Board (NTSB), the initiating event was a loss of electrical power triggered by a loose signal wire connection inside the vessel’s main switchboard. Improper wire-label banding prevented the wire from being fully secured, leaving it vulnerable to disconnection.

When the connection loosened, breakers opened. Low-voltage power supporting propulsion control systems was lost. Steering and thrust control were removed at the worst possible moment — inside a confined channel with a fixed structure directly ahead.

This was not a failure of navigation.
It was a failure of electrical integrity.

The incident has intensified scrutiny on shipboard power redundancy, inspection practices within switchboards, emergency recovery procedures following blackouts, and the vulnerability of critical infrastructure located along major shipping lanes.

For mariners, the lesson is direct.

Serious consequences at sea do not always begin with extreme conditions.

Sometimes, they begin with a single overlooked detail.

And in restricted waters, recovery time is measured not in minutes — but in seconds.

NMEA 2000 split power insertion. In this article we discuss what is split power insertion and why we might use it. There...
04/02/2026

NMEA 2000 split power insertion. In this article we discuss what is split power insertion and why we might use it. There are some working examples too. Follow the link for more information:

https://www.mecotraining.com/p/articles

Address

Gibraltar

Opening Hours

Monday 08:45 - 20:30
Tuesday 08:45 - 20:30
Wednesday 08:30 - 20:30
Thursday 08:30 - 20:30
Friday 08:30 - 20:30
Saturday 08:30 - 20:30
Sunday 10:30 - 18:00

Telephone

+35058007797

Alerts

Be the first to know and let us send you an email when Maritime Courses Online posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category