German Engines Rebuild

WHAT WE DO?
1.The engine is stripped to bare component
2.We then put all parts including the block into a high pressure cylindrical wash at high temperature with cleansing chemicals,this removes all carbon deposits and debris from previous failures
3.From this stage the Cylinder Block is re-honed.Some may need to be re-bored & some may need re sleeving this would be at an extra cost
4.The Piston

Rings are then changed
5.Connecting Rods are then checked
6.The Crankshaft is then checked
7.After this the main and big end bearing shells are replaced with new bearings
8.The oil pump is then checked and reconditioned where possible.
9.Cylinder Head is stripped down and checked for wear, pressure tested for cracks and then face machined 10.Valves and guides are then checked for wear.
11.After this valve seats are machined.
12.Refaced valves are re cut, and the head then vacuum tested.
13.From there we refit the rockers and followers
14.The Camshafts checked
15.Engine reassembled with new gasket and seals
24 MONTH WARRANTY warranty to our customers on all engine rebuilds
VEHICLE COLLECTION
Your vehicle will be collected by the trusted recovery team. recovery of your vehicle to the engine centre WORKSHOPS NATIONWIDE
We cover most areas of the UK. Engine centres across England and Wales
COMPETITIVE PRICES
All rebuilds are carried out using OEM parts providing a main dealer standard repair but at a fraction of the cost without compromising on quality.