Jeep Wrangler modification UK

07/09/2023

Rear disc conversion going on the bastardised jk 44 full float rear axle.

19/07/2023

Prototype set of tube arches ready to weld up.

03/04/2023

She needs a wash and some welding but back on the wheels.

27/03/2023

Full float narrowed jk 44 is ready to weld up tomorrow. Got the sye to fit as well, then set the rear pinion angle and weld on the perches.

21/03/2023

That’s the spindles settling into their over night home in the freezer with the corn dogs.

21/03/2023

Rear axle prepped and ready for the full float spindles to be fitted.

21/03/2023

Front dana 44 re geared to 4.10 swapped in, just waiting on the correct U bolt for the diff pumpkin.

22/01/2023

She’s been sat for over a decade and refused to start. had to change the fuel pump, fuel filter, and 3 injectors, but now she’s running.

21/01/2023

So another wrangler joins the fleet.

01/11/2022

I’ve been messing about with the shackle mount location on the front end to try maximise the wheel travel. I’ve got to move the mount down and towards the rear of the Jeep by around 50mm to gain some extra down travel. I also fitted a cj7 front and but not sure I like it.

20/06/2022

01/05/2022

Trying to work out where is best to cut the rear out.