The Underwood Group

26/10/2026

Another successful installation completed ✅
Our client was experiencing excessive temperatures within their plant room and required a solution to improve airflow and maintain a more stable environment.
We supplied and installed a thermostatically controlled supply fan, designed to automatically operate whenever the room temperature exceeds a set level. This provides continuous fresh airflow when needed and helps reduce energy consumption by running only when required.
A simple but effective solution delivering reliable temperature control and energy savings.

23/10/2026

Plantroom Refresh Complete! 🛠️
​Following recent upgrade works, our client asked us to supply and fit a step-over platform and rejuvenate the plantroom floors. After conducting a site survey, our team applied a high-performance anti-slip floor coating to elevate the space’s overall aesthetics while ensuring a safe, compliant working environment for maintenance personnel.

09/10/2026

A lovely handrail/balustrade pannel manufactured and installed by us.

From the site survey to completion we handled everything leaving the customer with a smile on there face !

30/09/2026

One of our regular clients got in touch after experiencing water leaking around a flue.
On investigation, our team found that the seal between the outer shroud and the concrete base had failed, allowing water to get through.
We carefully lifted the surrounding paving and applied a flexible resin seal to the joint, creating a watertight barrier and helping prevent any further leaks.

Another example of the range of services we can provide to our regular clients — from identifying the cause of a leak to delivering the right solution.
If you have a similar issue, get in touch with our team to see how we can help.

22/09/2026

Good morning — here’s a recent onsite repair carried out by our team.Our customer contacted us after a major failure on the tipping system of their truck. The original mountings were in poor condition, and the most viable solution was to cut out the damaged sections and replace them entirely. Following a site survey, all new materials were cut off‑site to minimise downtime and reduce mess.The customer is now back to work with a stronger, more reliable truck.

07/09/2026

17/08/2026

Good morning — something abit different

A Customer came to us with a vintage motorhome with a damaged thermostat housing that couldn’t be replaced. We rebuilt the casting onsite using TIG welding, then drilled and tapped new holes. The vehicle was reassembled and back on the road the next day.

17/08/2026

Loverly work from our friends over at GM

10/08/2026

Good morning — another recent ductwork installation completed by The Underwood Group.Our client had recently taken over the maintenance contract for several plant rooms. During the initial survey, it became clear that the system was non‑compliant due to the supply air not being delivered at low level.

•Survey completed
•Ductwork designed
•Installation completed

05/08/2026

A recent installation completed by The Underwood Group.
Our client had recurring issues in their plant room due to inadequate ventilation. They asked us to provide a solution — and that’s exactly what we delivered.
We carried out a full site survey to establish the scope of works, then supplied and installed ductwork tailored to the site requirements, bringing the plant room up to standard.