06/08/2024
🚗✨ Check Out This Stunning Transformation! ✨🚗
We’re excited to share the detailed process behind one of our recent interior transformations and wheel cleanings. At TrueShine Detailing, we pride ourselves on our meticulous attention to detail. Here's how we get it done:
Wheel Cleaning Process:
1-Initial Rinse: We start by thoroughly rinsing the wheels to remove any loose dirt.
2-Pre-Wash Application: Applying the correct ratio of pre-wash solution to prepare the wheels for deep cleaning.
3-Iron Contamination Spray: Using a specialized iron contamination spray (that’s why it turns purple) to break down stubborn grime.
4-Agitation: Agitating the chemicals with brushes to dislodge tough dirt.
5-Pressure Wash: Spraying off the wheels with a pressure washer to remove loosened dirt and contaminants.
6-Final Clean: Repeating the process with a less harsh chemical to ensure every bit of dirt is gone.
Interior Carpet Cleaning Process:
1-Vacuuming: Removing loose dirt from the mats with a vacuum.
2-Spray and Foam Application: Applying interior spray and foam to pe*****te deep into the fibers.
3-Electric Brush: Using an electric brush with a special attachment to scrub the fibers while simultaneously vacuuming up debris.
4-Repeat: Repeating the process for all interior carpets to ensure a thorough clean.
Door Panel Cleaning Process:
1-Spray Application: Spraying interior cleaner onto the door panel.
2-Agitation: Agitating with an interior brush to get into all the seams and crevices of the plastic.
3-Wipe Down: Wiping down with a microfiber cloth, then using a second cloth to dry and finish the job.
Experience the TrueShine difference and book your appointment today!
📞 07306 145598
📧 [email protected]
