Corazón Classic & Custom

Corazón Classic & Custom Custom sheet metalwork, vehicle repair and restoration, and general fabrication

Exocet custom bolt on aluminium heat shielding
18/08/2022

Exocet custom bolt on aluminium heat shielding

Racing Metro underseal renewal. Bare metal underside, epoxy primed, and Raptor applied
18/08/2022

Racing Metro underseal renewal. Bare metal underside, epoxy primed, and Raptor applied

Bespoke firepit chimney hood, semi installed
18/08/2022

Bespoke firepit chimney hood, semi installed

Some before and afters on this Jeep Wrangler 4.0 Sahara. Rear chassis was in a very bad way,  exacerbated by  “helpful” ...
02/07/2022

Some before and afters on this Jeep Wrangler 4.0 Sahara. Rear chassis was in a very bad way, exacerbated by “helpful” previous MoT welding (thin sheet badly welded over rust) All cut out and replaced with 3mm steel and protected properly inside and out. Almost non existent fuel tank skid plate hanger somehow eluded the tester, now repaired back to its original shape and function too

Large Steampunk Drill work in progress for ex movie vehicle commission
24/06/2022

Large Steampunk Drill work in progress for ex movie vehicle commission

All sharp edges and gaps fibreglassed and sanded smooth underneath the   project, finished with a coat of underseal sinc...
19/06/2022

All sharp edges and gaps fibreglassed and sanded smooth underneath the project, finished with a coat of underseal since this will be road registered as well as a track toy

Complete AN-6 fuel system plumbing for the   using quick connect fittings from Torques to adapt the original fuel tank, ...
16/06/2022

Complete AN-6 fuel system plumbing for the using quick connect fittings from Torques to adapt the original fuel tank, damper and rail connections. Also some additions to the chassis for front brake flexis and ABS sensor wire packaging

2 door Range Rover Classic chassis repair
13/06/2022

2 door Range Rover Classic chassis repair

Steam Punk Movie vehicle commissioned nose piece fitted
20/05/2022

Steam Punk Movie vehicle commissioned nose piece fitted

Rover P6 rear shock tower upgrade for coilovers & spherical mounts
03/05/2022

Rover P6 rear shock tower upgrade for coilovers & spherical mounts

Modified Korg SV-1 stage piano stand to support Moog synths above, including extendable legs for standing performances. ...
21/03/2022

Modified Korg SV-1 stage piano stand to support Moog synths above, including extendable legs for standing performances. Everything bolt on, only mods to official stand is 4 m10 drilled holes

Rolled out into the wild for the first time today, before heading onto the ramp for its brake and fuel line fitment
04/03/2022

Rolled out into the wild for the first time today, before heading onto the ramp for its brake and fuel line fitment

Address

Henfield

Website

Alerts

Be the first to know and let us send you an email when Corazón Classic & Custom posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share