MG ZR "Black Widow"

MG ZR "Black Widow" Hersteller: MG
Modell: ZR 160
Motorisierung: 1,8 VVC
Leistung: 115 KW (160PS)

Today it was time for some more maintanance 🔧Changing the coolant was likely overdue so I decided to do a full system fl...
04/04/2024

Today it was time for some more maintanance 🔧

Changing the coolant was likely overdue so I decided to do a full system flush.

Drained the old coolant and refilled with distilled water and some cleaner. Multiple drains and refills later the water came out clear enough to refill the system with new coolant.

Another thing ticked off the list 😊

Some progress has been made during the last few days 😊There was a minor oil leak into the gearbox and I couldn't tell wh...
31/03/2024

Some progress has been made during the last few days 😊
There was a minor oil leak into the gearbox and I couldn't tell whether it was the crankshaft oilseal or the sump seal.
So to do the job the best way I could everything needed to be replaced 🤷

'Wio' is now back together and has had a first sucessful test run 😁

Happy Easter to everyone of you 🥚🤗

It's been 3 years since the last update 😳Time to show that the Widow is still alive and running.Well not running for the...
27/02/2024

It's been 3 years since the last update 😳

Time to show that the Widow is still alive and running.
Well not running for the next few weeks actually as it was about time for a clutch change.
On removal of the gearbox I wasn't too happy with what the flywheel looked like.
So it was off to be scimmed and balanced. Now its ordering some more parts and gaskets to get ready for reassembly 🛠️

Happy birthday my Love🖤💜16 years old and no wrinkles 😉Its always a pleasure to ride with you!
06/01/2021

Happy birthday my Love🖤💜
16 years old and no wrinkles 😉
Its always a pleasure to ride with you!



Time to start preparations for hibernation 💤Went out for one a last trip today in order to let the engine cleaner do its...
25/10/2020

Time to start preparations for hibernation 💤
Went out for one a last trip today in order to let the engine cleaner do its work.

We have been told its best to do an oil change before hibernation rather than afterwards so that all the contaminants like unburnt fuel or water don't stay inside during sleep.

So we did the cleaning run, flushed the engine with some flushing oil and changed the oil spec from 5W40 to 10W60.

Our widow won't be running during wintertime so no need for us to stick with a 5W oil.
One thing that was immediately noticeable is that the VVC mechs seem to run a lot more quiet. 🤫

Bootylicious 💜
22/08/2020

Bootylicious 💜


She has been mine for five years now and has changed a little😉She has aged with dignity🖤💜 and it is always a pleasure to...
02/05/2020

She has been mine for five years now and has changed a little😉
She has aged with dignity🖤💜 and it is always a pleasure to take a ride with her.

Thanks to my wonderful husband , for all his support and work❤️I love you!








12/04/2020

Sun is shining ☀️
Car is clean ✨🚗✨

So why not take her for a spin 😉

30/03/2020

I know what everyone is thinking 😁
You are like "There's so much thread left on the coilovers. Why don't they just lower it even more? 🤔"

Because we wont get out of the garage anymore, thats why 😏

Time to think about installing some sort of car lift to get back on the road 😅

Almost forgot to tell you guys and girls that everything is back together now 💜All bushes have been replaced and the coi...
29/03/2020

Almost forgot to tell you guys and girls that everything is back together now 💜

All bushes have been replaced and the coilovers are installed successfully 🔧

We are absoluetely in love with the way our Widow looks and drives now.
Time to go on and fix some other bits and bobs ☺️

On we go with the next phase before it's finally time to fit the new parts ✨This time it was all about derusting 🆘🤕Thoug...
05/02/2020

On we go with the next phase before it's finally time to fit the new parts ✨

This time it was all about derusting 🆘🤕
Though not too bad I thought it would be a good idea to treat the strut bearing and wing mounting points while accessible.

First time I tried the Bilt Hamber Deox Gel and that stuff actually does a pretty good job. After treatment 2 layers of good old Hammerite went on to keep the spots from rusting again too fast 🔨

Now it's time to sit back and let it cure properly. 😴

Out with the old - in with the new 💜💛Looking at the state of the old strut mounts it was either a damn good refurb or ne...
14/01/2020

Out with the old - in with the new 💜💛

Looking at the state of the old strut mounts it was either a damn good refurb or new ones. As they are still available and dont cost much: new ones were ordered. ✨

When they turned up I was quite shocked about what the new rubber bushes looked like 😳 Turned out to be old and brittle wax, easily removed with a bit of heat. 🔥

Finally, some 'seals' were created from sponge rubber to stop the strut mounts from rubbing and rusting onto the mounting points.

So the coilovers are finally ready. On to the next tasks 🚶

Adresse

Zernsdorf

Webseite

Benachrichtigungen

Lassen Sie sich von uns eine E-Mail senden und seien Sie der erste der Neuigkeiten und Aktionen von MG ZR "Black Widow" erfährt. Ihre E-Mail-Adresse wird nicht für andere Zwecke verwendet und Sie können sich jederzeit abmelden.

Teilen

Kategorie