07/04/2021
What is a wind turbine blade transport vehicle?
The wind turbine blades transport vehicle has the characteristics of stable and reliable structure, low overall center of gravity, and convenient operation. The loading trailer is a 16-meter low flat semi-trailer with an overall height of 4400 mm after installation, so as to reduce the overall height of the center of gravity and improve the stability of the whole vehicle, which provides a safety guarantee for the transportation blades to adapt to different road conditions.
The overall structural layout of the mountain transport tooling is reasonable, with the following characteristics:
(1)
Six cylinder diesel engine is adopted to provide sufficient power for blade tooling to realize rotation, lifting and pitch. And equipped with a sealed box beam as a gas source, and equipped with a number of gas quick connect, convenient for customers to use the air pump for bolt removal.
(2)
Four hydraulic motors are used to rotate the whole machine 360 degrees, and two hydraulic motors are used to pitch the blades, which not only ensures the balance synchronization, but also strengthens the power.
(3)
The position of the oil cylinder seat is welded with transverse and longitudinal steel plates to prevent the welding deformation of the oil cylinder seat after long-term use.
(4)
All the contact surfaces of slewing bearing and the side face of blade fl**ge are machined and plane milled to ensure the smooth contact and uniform stress between slewing bearing and blade mounting surface.
Shanghai stide manual hydraulic advertisement Shanghai stide is engaged in the development, sales and service of fluid machinery technology and manual hydraulic related products View details
(5)
In order to meet the different sizes of the blades transported by customers, two detachable counterweight boxes are installed at the front, which can be adjusted according to the situation; when rotated 180 degrees, it can ensure that the mountain transport tooling does not exceed the rear part of the vehicle.
(6 )
The butt fl**ge of blade adopts the design of widened plane multi diameter hole to meet the needs of customers for transporting different blades; the blade transport tooling can be locally modified according to customers' requirements to meet the needs of customers for transporting two blades at the same time with one blade transport tooling.
(7)
It is equipped with 4 upper pedals, 3 mounting pedals and 6 brake fixing hook plates, which are convenient for customers to remove bolts and maintain the tooling as a whole. It also protects the platform and guard plate for pitch hydraulic motor and pitch slewing bearing.
(8)
The overall structure of the counterweight requirements are relatively reduced, reducing the total weight of full load, in order to ensure the safety of the transportation process.
(9)
It is made of high-strength steel plate, which not only ensures the overall safety, but also controls the overall weight, and improves the economy and convenience in the no-load process.
When is the wind turbine blade transporter used?
A method of transporting a wind turbine blade, wherein the blade includes an inner extension piece segment and an outer blade segment. The length of the inner extension piece segment is approximately half of the outer blade segment, and the method includes fastening a pair of inner extension piece segments together to form The extension piece transport segment, because the length of the extension piece transport segment is roughly the same as the outer blade segment, it is easier to transport.
Where can I get wind turbine blade transporter?
Shandong TSD Special Vehicle manufacturing Co.,Ltd.located at the largest semi trailer manufacturing base in China. We have independent patent technology and professional R & D team for semi-trailer production.
Why use wind turbine blade transporter
Wind power farms are usually built on high mountains, and a trailer that transports wind power fan blades to the top of the mountain has to pass through rugged mountain roads or villages. This brings huge challenges to the transportation of wind power fan blades, and a special transport vehicle for wind power fan blades can complete this arduous task.
Ordinary pulling vehicles generally have a length of about 50 meters or more. Turning on provincial and national highways is already facing great challenges. Slow turning often causes road congestion and relatively poor passability.
There are many names for special vehicles for transporting wind power fan blades, such as lift trucks, mountain reverse transport tools, blade reverse transport vehicles, and so on. This is based on the advantages of the foundation love you fan transport special vehicle.
How to use why use wind turbine blade transporter
Use a special reverse loading truck to transport wind turbine blades to the top of the mountain. In this process, some dangerous road conditions are often encountered, usually with cliffs on one side and high slopes, sharp bends, diagonal roads, and high-voltage cables on the other side. Road conditions. When using a traditional blade reverse vehicle, the high-voltage cables that cross the road need to be removed so that the blades can be lifted and turned. Nowadays, there are also some tooling vehicles hinged to install a loading plate for fixing the blades in the vehicle body. When such a road condition with high-voltage cables occurs, the loading plate is manually lifted to a certain angle and the blades are lower than the high-voltage cables , So that the tooling truck can pass safely.
