WEST 3D Motorsport

11/01/2023

09/12/2022

Discounted Excess/Seconds Sale

1. Ducted CT EVO headlight prototype with lights 25% off

2. CT Evo curved twin vent (finish NQR) 25% off

3. CT Evo twin vent ( slight line shift at rear ) 25% off

4. CP Evo twin vent ( nothing wrong with it, just excess ) 15% off

01/08/2022

.
ITEM: CT EVO AEM/LINK Cupholder
PRICE: $250PP
DESCRIPTION:
An adaption on our popular Motec cupholder to house the new AEM/LINK 8button switch panel. 3D scanned from the OEM trim, this design bolts in place of the OEM cupholder.
Printed in ABS plastic for its strength/heat resistance. 100% customisable should you want to mount something else in this location

01/08/2022

.
ITEM: EVO 10 Rotary Cupholder
PRICE: $250PP
DESCRIPTION:
3D scanned from the OEM trim. This design offers our popular motec rotary mounting solution from the CT's for the Evo 10 platform. This design bolts in place of the OEM cupholder.
Printed in ABS plastic for its strength/heat resistance. 100% customisable should you want to mount something else in this location

10/02/2022

.
ITEM: EVO 10 DASH TRIPLE POD
PRICE: $200PP
DESCRIPTION:
Originally a client commision, this design provides a clean way to integrate 3 gauges into the Evo 10 dash without altering the stereo. Customisable for gauges, screens, etc. Depending on setup. Some of the plastic structure behind will need to be cut. Printed in ABS plastic for its strength/heat resistance. 100% customisable should you want to mount something else in this location

10/02/2022

.
ITEM: CT EVO TWIN CUPHOLDER LARGE
PRICE: $120PP
DESCRIPTION:
Originally a client commision, this design deletes the IC sprayer button and allows for 2 large cupholders. 3D scanned from the OEM piece with OEM bolt on fitment. Printed in ABS plastic for its strength/heat resistance. 100% customisable should you want to mount something else on this location

04/02/2022

.
ITEM: EVO 9 INTAKE DUCT V2
PRICE: $410PP (HOSE +$40)
DESCRIPTION:
Designed to make use of the RHS Evo 9 bumper void where the intercooler sprayer has been deleted. 3D scanned from the inner bumper skin, the ram style intake forces air down to a 3" section of ducting and sends it up to feed cooler air into the air box area. Lower section mounts to the OEM mesh mounts. Upper section bolts to the OEM IC sprayer bolt holes. Printed in ABS plastic for its strength/heat resistance.

02/02/2022

.
ITEM: XR4 FOG RING INTAKE
PRICE: $80+ postage (Hose +$40)
DESCRIPTION:
Modelled using a 3d scan of the OEM piece. This print retains all the factory clips and clicks into place. Ducting is clamped and taped onto print, ducting is routed to supply colder air to your intake. Can be supplied in a raw finish or smoothed. Printed in high strength, temperature resistant ABS

01/02/2022

.
ITEM: XR4 REAR REFLECTOR DELETE
PRICE: $100 (pair ) + postage
DESCRIPTION:
Modelled using a 3d scan of the OEM piece. This print retains all the factory clips and clicks into place. Customisable upon request. Can be sent in a raw finish or smoothed (pictured). Printed in high strength, temperature resistant ABS

05/09/2021

.
ITEM: CT EVO DUCTED HEADLIGHT WITH LIGHT
PRICE: $500PP
DESCRIPTION:
Based off a 3d scan, this ABS printed headlight bolts in place of the OEM piece. The multi part print comes assembled with a layer of high build primer. 3.5" projectors are purchased separately. It is advised that the print is professionally painted/dipped for a super nice install. Perfect functionality allows for a cold stream of air to access your intake. I will update with installed photos as they become available