TBT Wiring and Tuning

TBT Wiring and Tuning A small business based in Adelaide, SA providing motorsport wiring and EFI tuning services.

A very nasty 6 litre LS we just wired up and dyno tuned along side . Even in the new sea of 7 litres, mega grunt & well...
22/06/2023

A very nasty 6 litre LS we just wired up and dyno tuned along side . Even in the new sea of 7 litres, mega grunt & well mannered rarely come together, this engine has both.

Custom curly cord for a cool steering wheel with paddle shifters and radio PTT.
22/06/2023

Custom curly cord for a cool steering wheel with paddle shifters and radio PTT.

A Nissan VR35 loom with the works, plus a simple adapter loom for M190 ecu specifically for Engine Dyno work.
10/06/2023

A Nissan VR35 loom with the works, plus a simple adapter loom for M190 ecu specifically for Engine Dyno work.

A few pro class buggy LS loom pieces made and into figment stages recently.
10/06/2023

A few pro class buggy LS loom pieces made and into figment stages recently.

A fun project to throw in the mix recently. Out with the old, in with the new… sort of… fitting an Autronic SM4 to this ...
05/05/2023

A fun project to throw in the mix recently. Out with the old, in with the new… sort of… fitting an Autronic SM4 to this turbo Galant. Brand new wiring harness made from the right materials, brand new LS2 ignition coil kit ready to fit, electronic boost control, flex fuel sensor kit. Will be good to get this car running reliably for years to come.

Couple of bits for a simple streeter project we’ve got in at the moment.
06/04/2023

Couple of bits for a simple streeter project we’ve got in at the moment.

Wire up ✅ fire up ✅ dyno tune ✅ this awesome rally 610 with an Autech SR20 is all done. Wired up in our usual fashion, M...
23/02/2023

Wire up ✅ fire up ✅ dyno tune ✅ this awesome rally 610 with an Autech SR20 is all done. Wired up in our usual fashion, M130 ecu, PDM30, and a C127 with GPS, engine harness with a bunch of spares, flex fuel, host of temp and pressure sensors, a couple of body looms, and a dash loom to tie it all together. We added some brake pressure sensors for easy to monitor / set bias adjustment, some driveline speed sensor wiring, extra light power supply to the front of the car and all the factory bare essentials across the car powered up. Keen to see some data from its first outings, there will be a lot of 100% throttle I’m guessing.

A couple of looms ready to piece together for a current big project 😎
04/02/2023

A couple of looms ready to piece together for a current big project 😎

Recently finished 2 new LS1 5.7 litre engine harnesses for buggies moving up to pro class! Here’s one of them, simple, n...
09/12/2022

Recently finished 2 new LS1 5.7 litre engine harnesses for buggies moving up to pro class! Here’s one of them, simple, neat and plenty of fun to be had.

Plenty of big wiring jobs lately, pictured is a front body loom for an off-road racing buggy including an array of light...
24/10/2022

Plenty of big wiring jobs lately, pictured is a front body loom for an off-road racing buggy including an array of lights, fans, sensors and pumps.

A M130 harness ready to be fitted.
07/10/2022

A M130 harness ready to be fitted.

An extremely unique project on the go at the moment. Some bits and bobs along the way so far…
07/10/2022

An extremely unique project on the go at the moment. Some bits and bobs along the way so far…

Address

Adelaide, SA

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm

Website

Alerts

Be the first to know and let us send you an email when TBT Wiring and Tuning posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to TBT Wiring and Tuning:

Shortcuts

Share

Category